What are the advantages of using an MBW's Vibratory Roller Attachment?
MBW's Vibratory Roller Attachments for Skid-Steer Loaders are high performance, low cost, compactors. These rollers can be attached to any skid-steer brand. ATS (smooth drum) models deliver high density compaction on all essentially granular soils. ATP (padded drum) models provide excellent results on the full range of soils including cohesive materials.
A number of unique features separate MBW rollers from other brands. All ATS and ATP models come with an integral and patented knockdown blade. Blade height is adjusted by the skid-steer controls. The blade enables users to increase productivity as well as better manage lift depth for optimal compaction results.
All ATS and ATP models feature a patented exciter system.
An advanced exciter shaft design reduces shaft deflection by approximately 70% and reduces system heat by up to 100 degrees.
This is an important advancement in the state-of-the-art and significantly improves service life of bearings, seals and lubricants.
There are no grease fittings on ATS or ATP models. Exciter systems are oil mist lubricated. Vibrating drums are nicely isolated from the roller frame and transference of vibration to the skid-steer is minimal. A flow control valve prevents over speeding of the exciter shaft.
All models are provided with a standard quick-attach system.
MBW’s range of Vibratory Rollers for Skid-Steer Loader offers contractors and rental yards a cost effective, high performance alternative to much more costly self-contained compaction equipment.
Vibration is effectively isolated from the roller frame and transference of vibration to the skid steer loader is minimal due to 12 large heavy duty rubber shockmounts.
Control valve block compensates for correct flow of oil needed to prevent over speeding of the exciter shaft and also compensates for over pressure.
Universal adapter plate is standard with all units.
Two six foot long hydraulic hoses come with quick disconnect/connect couplings and with quick disconnect/connect couplings and with protective oil hose covers for safety.
Drive motor is inside the confines of the heavy duty steel frame to prevent damage.
Maintenance is reduced to change of exciter oil at 1000 hours of service and simple tightening of hardware. and simple tightening of hardware.
Smooth and open pad drums available in 73 and 84 inch widths.
|Centrifugal Force||8850 lbf (39.4 kN)||8850 lbf (39.4 kN)||9765 lbf (43.4 kN)||9765 lbf (43.4 kN)|
|Exciter Speed||3000 rpm||3000 rpm||3000 rpm||3000 rpm|
|Dynamic Linear Force||121 lbf/inch 213 N/cm)||121 lbf/inch(213 N/cm)||116 lbf/inch(204 N/cm)||116 lbf/inch(204 N/cm)|
|Amplitude||0.05 in (1.3mm)||0.05 in (1.3mm)||0.05 in (1.3mm)||0.05 in (1.3mm)|
|Weight||2100 lbs (953 kg)||2250 lbs (1021 kg)||2350 lbs (1066 kg)||2500 lbs (1134 kg)|
|Length||34.5 in (88 cm)||34.5 in (88 cm)||34.5 in (88 cm)||34.5 in (88 cm)|
|Height||29 in (74 cm)||30 in (76 cm)||29 in (74 cm)||30 in (76 cm)|
|Working Width||73 in (185 cm)||73 in (185 cm)||84 in (213 cm)||84 in (213 cm)|
|Flow Requirement||10-20 gpm (38-76 Lpm)||10-20 gpm (38-76 Lpm)||10-20 gpm (38-76 Lpm)||10-20 gpm (38-76 Lpm)|
|Pressure Requirement||1500-3000 psi (103-207 Bar)||1500-3000 psi (103-207 Bar)||1500-3000 psi (103-207 Bar)||1500-3000 psi (103-207 Bar)|
|Hydraulic Connection||1/2 " Flat Face Quick Coupling||1/2 " Flat Face Quick Coupling||1/2 " Flat Face Quick Coupling||1/2 " Flat Face Quick Coupling|